The HafcoVac EXLR-T is a certified explosion-proof industrial vacuum that runs on compressed air. It is the all-inclusive EXLR with a 4.5 ft Overhead Extension Kit for beams, ducts and pipes. There is no electric motor, so there are no sparks, no heat build-up and nothing to burn out. All you supply is the air.
Why choose the HafcoVac EXLR-T
- Safe in hazardous locations: ATEX certified and rated for Class I, Division 1 and Class II, Division 1 areas.
- Strong suction: up to 5x the suction of a typical electric vacuum.
- Wet or dry: remove the filter and use the liquid shut-off for wet clean-up.
- Quiet: the S’HUSH Silencer brings noise down to about 77 dB.
- Organized: the JACK Tool Holder keeps hoses and tools on the vacuum, with two welded handles for moving it.
- Reach overhead: Overhead Extension Kit (4.5 ft) for beams, ducts and pipes.
- Lifetime warranty: only consumables such as filters, bags, gaskets and silencer foam ever need replacing.
What’s included
- S’HUSH Silencer (cuts noise to about 77 dB)
- JACK Tool Holder for hoses and attachments
- 4.5 ft Overhead Extension Kit
- Premium HEPA filter
- 20 ft static-conductive air supply hose with universal fittings
- 25 ft or 20 ft vacuum hose (depending on configuration)
- Grounded cleaning tools
- 25 ft grounding cable
- Endorsement Certificate for combustible dust environments
Choose your configuration
- Drum size: 30 Gallon or 55 Gallon
- Air supply: 48 CFM, 85 CFM, 185 CFM
- Vacuum hose: 1.5″
Match the air supply to your compressor. A vacuum that gets less air than it needs loses a lot of performance, so if you are unsure, choose the next size down. See the Technical Data tab for compressor sizes.
Ideal for
Combustible dust housekeeping in woodworking, metalworking and machine shops, grain, flour and food processing, oil, gas and sludge clean-up, paper and pulp, powder and chemical processing, and metal powder recovery.
