NoticeOur website has a new look! During the transfer you may notice some technical issues, please contact us directly: (519) 893-1161 or info@ssfinishingsystems.ca. We apologize for any inconvenience.
DVXG Gravity Feed Manual Spray Guns

Precision-built equipment for professional finishing.

Proudly Canadian
🔍
DVXG Gravity Feed Manual Spray Guns

DVXG Gravity Feed Manual Spray Guns

Price range: $1,342.70 through $1,381.85

Next Level Design To Maximize Next Level Performance

Shipping quote: Shipping for this item will be quoted separately. We will contact you with the shipping cost after you place your order.
SKU: Parent-DVXG Gravity Feed Manual Spray Guns Category: Tag: Brand:

Binks DVX manual gravity/suction feed air spray guns are designed to provide improved balance and ergonomics, with high flow rate capabilities to keep up with any painter.

  • Better Finish:Reduces orange peel and mottling; redesigned fluid body and air caps cut turbulence.
  • 15% Less Material:Higher transfer efficiency than other non-electrostatic air spray guns; sprays at 2 bar for lower air use.
  • High Flow, Large Pattern:Consistent pattern with air cap orientation lock and less build-up at the cap.
  • Quick-Release Air Cap:Hard-anodized retaining ring removes in less than a full turn.
  • Redesigned Trigger:No sideways or rotary play, with a smooth pull.
  • Co-Axial Air Valve:Air inlet and air-adjusting valve in one part, with 12x sensitivity for fine control.
  • Tool Kit Included:Valve tool, Torx driver and tip wrench.
SpecificationValue
SeriesBinks DVX
Gun TypeManual air spray gun, gravity feed
Air CapsG1 and G2 (HVLP, high efficiency, conventional)
Fluid Tips / Needles8 sizes, standard or nitrile; 2 needle sizes
Air InletAdjustable standard
Spray PressureSprays at 2 bar; works at low and high inlet pressures
Suitable MaterialsWaterborne and solventborne coatings, high-solids urethanes, epoxies, enamels
AccessoriesDeKups disposable cups, gravity cups, lock-out fluid knob, lock-out spreader valve
ConfigurationsDVXG-C-G1-11: DVX GRAVITY (G1, 1.1MM Stainless Steel, CUPPED)
DVXG-C-G1-12: DVX GRAVITY (G1, 1.2MM Stainless Steel, CUPPED)
DVXG-C-G1-13: DVX GRAVITY (G1, 1.3MM Stainless Steel, CUPPED)
DVXG-C-G1-14: DVX GRAVITY (G1, 1.4MM Stainless Steel, CUPPED)
DVXG-C-G1-15: DVX GRAVITY (G1, 1.5MM Stainless Steel, CUPPED)
DVXG-C-G2-16: DVX GRAVITY (G2, 1.6MM Stainless Steel, CUPPED)
DVXG-C-G2-18: DVX GRAVITY (G2, 1.8MM Stainless Steel, CUPPED)
DVXG-C-G2-20: DVX GRAVITY (G2, 2.0MM Stainless Steel, CUPPED)
DVXG-U-G1-11: DVX GRAVITY (G1, 1.1MM Stainless Steel, UNCUPPED)
DVXG-U-G1-12: DVX GRAVITY (G1, 1.2MM Stainless Steel, UNCUPPED)
DVXG-U-G1-13: DVX GRAVITY (G1, 1.3MM Stainless Steel, UNCUPPED)
DVXG-U-G1-14: DVX GRAVITY (G1, 1.4MM Stainless Steel, UNCUPPED)
DVXG-U-G1-15: DVX GRAVITY (G1, 1.5MM Stainless Steel, UNCUPPED)
DVXG-U-G2-16: DVX GRAVITY (G2, 1.6MM Stainless Steel, UNCUPPED)
DVXG-U-G2-18: DVX GRAVITY (G2, 1.8MM Stainless Steel, UNCUPPED)
DVXG-U-G2-20: DVX GRAVITY (G2, 2.0MM Stainless Steel, UNCUPPED)
Service ManualSB-E-3-010
DVX Manual Gun Sell Sheet 03-445-01DVX Gravity Gun Manual SB-E-3-010DVX Gun Brochure 03-422-01DVX Gravity Gun Manual SB-E-3-010 (French)DVX Gun Brochure (French)

Related products