Stop Overspray Paint from Staining Your Walls: RBL Tacky Netting for Paint Booths
You did the prep. The gun is dialled in. Then the clear coat dries and the dust nibs show up. A lot of that dirt starts on your booth walls. S&S Finishing Systems now carries RBL Products, starting with RBL White Tacky Netting: a sticky nylon net you hang on the booth walls to catch dust, dirt and overspray before it lands in your finish.
Where Does the Dirt in Your Paint Job Come From?
Most dirt in a finish comes from three places: the panel (sanding dust, fingerprints, residue), the painter (clothing, gloves, hair) and the booth itself. Booth dirt is the sneaky one. Overspray and dust settle on the walls, dry out, and then get knocked loose every time someone walks by, a door opens, or the airflow changes.
Bare metal walls can’t hold on to that dirt. Tacky netting can. It gives loose particles something sticky to land on, so they stay on the wall instead of floating back into the air and onto your wet paint.
How RBL Tacky Netting Works

Used netting (left) vs new. Image: RBL Products
1. Hang it on the walls
The net hangs like a shower curtain from magnetic hooks along the booth walls.
2. Warm booth, sticky net
RBL uses an “open tack” coating that works with the warm temperatures inside the booth.
3. Dirt sticks, finish stays clean
Dust, dirt and overspray get caught in the net instead of drifting back into the spray zone.
4. Swap it when it’s loaded
When the net is full, take it down and hang a fresh section. No scraping walls.
The RBL Products We Carry
Start with the kit, then add rolls and magnets as you need them.
Best Place to StartRBL White Tacky Netting Starter Kit
Everything you need to get your first booth set up.
- White tacky netting
- Includes 20 magnetic hooks
- Shower-curtain-style hanging
Refill RollRBL White Tacky Netting, 72" x 160′ Roll
A full-height roll for covering booth walls, and the refill when your net is loaded.
- 72 in wide x 160 ft long
- RBL says one roll covers two standard booths
- Eyelets every 2 in, top and bottom
AccessoryRBL Magnets for Tacky Netting, 6 Pack
Extra or replacement magnetic hooks for hanging your netting.
- 6 magnets per pack
- Add more hanging points
- Replace lost or worn hooks
Why Finishers Like Tacky Netting
Fewer Dust Nibs
Less loose dirt in the air means less sanding and polishing after the paint cures.
Cleaner Booth Walls
Overspray builds up on the net, not on your walls. Swap the net instead of scraping or repainting.
Lint-Free Nylon
Monofilament nylon, so the net itself doesn’t shed fibres into your booth.
Flame Retardant
RBL says the netting has built-in flame-retardant properties for professional paint and body shops.
Quick to Hang
Eyelets every 2 in on both edges plus magnetic hooks. No drilling, no tape.
Long-Lasting Rolls
RBL rates the netting for up to three months of use, depending on your booth and workload.
Tacky Netting vs Bare Booth Walls
With RBL tacky netting
- Dust and overspray stick to the net
- Less dirt stirred back into the air
- Walls stay cleaner for longer
- Clean-up = swap a section of net
Bare walls
- Dry overspray flakes off over time
- Dirt gets knocked loose by traffic and airflow
- Build-up needs scraping or recoating
- More nibs to sand out of the finish
RBL Tacky Netting at a Glance
| Specification | RBL White Tacky Netting |
|---|---|
| Material | Lint-free monofilament nylon |
| Coating | Open tack formula, works with warm booth temperatures |
| Fire safety | Built-in flame-retardant properties (per RBL) |
| Hanging | Eyelets every 2 in along top and bottom edges; magnetic hooks |
| Roll size we carry | 72 in W x 160 ft L |
| Coverage | About two standard booth sizes per roll (per RBL) |
| Starter Kit | Netting plus 20 magnetic hooks |
| Colour | White |
Specifications as published by RBL Products. Coverage and service life depend on booth size, airflow and how much you spray.
How to Hang Tacky Netting in Your Booth

Magnetic hooks hold the net in place. Image: RBL Products
- Clean the walls first. Vacuum or wipe down loose dust so you start fresh. Avoid blowing dirt around with compressed air.
- Plan your layout. Measure the wall runs and keep clear of light fixtures, filters, doors, sensors and fire-protection equipment.
- Place the magnets. Set magnetic hooks along the top of the wall at even spacing.
- Hang the net. Hook the eyelets on the magnets, shower-curtain style, and let the net hang flat.
- Run the booth. Let the booth warm up and cycle before you spray, so the tack is working and loose particles are cleared.
- Check and replace. When the net looks loaded or stops grabbing dust, take it down and hang a new section.
Safety first: Confirm placement with your booth manufacturer so the netting doesn’t block airflow, lighting, filters or fire-suppression equipment, and follow your local fire code and workplace safety requirements.
5 Habits for a Cleaner Booth
Tacky netting works best as part of a full clean-booth routine, not on its own.
1. Cover the floor too
Pair netting with adhesive floor protection like the PIG® Paint Booth Mat or a tacky floor mat at the door to stop dirt walking in.
2. Keep the filters in shape
Check and change your booth filters on schedule so the airflow keeps carrying overspray away.
3. Keep doors closed
Every open door lets shop dust in. Keep the booth running when doors open so air pushes out, not in.
4. Keep the booth empty
Extra supplies, boxes and carts collect dust. If you don’t need it to spray, store it outside the booth.
5. Suit up
Wear a lint-free paint suit and fresh gloves before you spray. The painter is one of the biggest sources of dust nibs.
Who Is RBL Products?
RBL Products is a Detroit, Michigan company that designs and sells detailing and collision products for the automotive, marine and trucking industries. Its range includes abrasives, booth maintenance, paint masking, power and hand tools, UV products, and protective wraps and film.
Tacky netting is our first RBL product line. If there’s another RBL product you’d like us to bring in, let us know.
Frequently Asked Questions
What is tacky netting for a paint booth?
It’s a lightweight net with a sticky coating that hangs on the booth walls. It catches dust, dirt and overspray so they don’t get blown back into the air and onto a fresh finish.
How do you hang it?
RBL’s netting has eyelets every 2 inches along the top and bottom edges. You hang it from magnetic hooks, like a shower curtain. The Starter Kit includes 20 hooks.
How long does it last?
RBL says up to three months. Busy booths and heavy overspray will fill it faster, so replace it when it looks loaded or stops grabbing dust.
How much netting do I need?
RBL says one 160 ft roll covers two standard booth sizes. Send us your booth’s wall measurements and we’ll help you work out how much to order.
Does tacky netting replace booth filters?
No. Filters clean the air moving through the booth. Netting catches dirt that settles on the walls. You need both.
Is it safe to use in a spray booth?
RBL says the netting has built-in flame-retardant properties. Always keep it clear of lights, filters and fire-protection equipment, and follow your booth manufacturer’s instructions and local fire code.
Ready to Cut Dust Out of Your Finish?
Shop RBL tacky netting or ask our team about pricing, availability and how much you need for your booth. Serving Canadian finishers since 1977.


